ABOUT US

  • One of the leading supplier of AAC Plant, ALC Plant, European NAAC Plant & CLC Plant in India.
  • Serving their clients with its perfection, efficiency and quality of work.
  • Company manufactures these state of the art machineries, used in producing AAC , ALC & CLC Blocks.
  • Helps their clients, in setting up this plant at their places.
  • Company plant, located in the Wada area of Thane district. This is fifty cubic meter operational plant for customer demonstration.
  • Customer person can get trained in live production at our plant before landing of the equipment at customer premises.

  • Block Size
    Block size (MM) Block Size (inch)
    600x 200x 100 mm 24”x8” x 4”
    600x 200x 150mm 24” x8”x 6”
    600 x 200x 200mm 24” x8”x 8”
    600 x 200x 225mm 24”x 8”x 9”


     Raw Materials For AAC/ ALC Block/ NAAC Block

  • Fly Ash : This raw material is freely available in Thermal Power Plant. There are no taxes on this item whatsoever.
         Transportation charges are only to be attended by the entrepreneur.

  • Lime : Active powered lime is a requirement for giving the real aeration to the product. Different qualities of lime are
         available and depending on the raw materials, the mix design can be chosen to get the optimal quality of production.

  • Cement : This project aims to utilize OPC cement as main binder material. It will give faster strength to the bricks, besides
         giving improved consistent quality. It also ensures a better cost effectiveness for the same. Using OPC will be a standardized
         practice. The other prime advantages of using OPC(compared to other binders) is it’s easy availability locally through
         nation wide Retail Network of Cement companies.

  • Gypsum : This too is an industrial waste. This is available as an industrial by product of Fertilizer Plant. Gypsum is
         responsible to give long term strength to the blocks.

  • Aluminum Powder : Finely ground Aluminum powder is used in very limited quantity (less than 0.5%), so that it react with
         active lime and silica in base material to make the aeration and swell the product, making it very light weight product.

  •  Procedure OF AAC/ ALC Block

    • Mixing Section
    • Cutting Section
    • Steaming Section (ALC Block)
    • Steaming Section(AAC Block)


    AAC - ALC Plant Manufcturer & Supplier
  • The first stage of mixing process is making Fly Ash Slurry.
         According to the design, Water and Fly Ashdischarged in
         the Slurry Mixer with the help of Conveyor Belt. After that
         this slurry, gets discharged in to the Slurry Tank. This is the
         second stage of refining process. Now with the help of pump
         this mixture pumped to mixer.
  • Through this Screw Conveyor, Cement and other ingredients
         are poured in to the mixer. These ingredients are weighed by
         control panel.
  • In the end according to the duty cycle of mixer, the slurry is
                                                                                                                                     discharged in to Mould.



  • After the Mould gets filled up to a certain level, after that,
         transferred to the Storage Area with the help of Driving Device
         Machine. It takes around two to three hours for the Slurry to
          become a Concrete Cake.
  • Now the Mould is removed with the help of Crane and only
         Cake is transferred to the Wire Cutting Machine.
  • Here the cutting process takes place with the help of this Wire
         Cutting Machine. The Cake is now ready for further process



  • These Cake pieces are now ready to sent in to the steaming
         chember, through Driving Device Machines. After filling up one
         chamber, both the doors get closed by operator.
  • The operator now starts the Boiler machine. This Boiler
          machine runs with the help of wood, as this is a cost effective
         measure. The Cakes are kept inside for around 10 to 12 hours
  • In the end, Cake Trolley is discharged out of the Steaming
         Chember and is kept in stocking area for around 4 days. Now
         these Blocks are completely ready for Commercial use.



  • These Cake pieces are now ready to sent in to the Autoclave.
  • Cake inside autoclave kept around temperature under high
         pressure for 10 hrs
  • After that, cake removed from the autoclave and blocks are
         ready for commercial use.


  •  Video Gallery